Toyota LAND CRUISER Service Manual Supplement page 152

AUTOMATIC TRANSMISSION (STATION WAGON)
AT-82
(e) Install the front and rear bracket.
13. (w/MECHANICAL WINCH)
INSTALL POWER TAKE-OFF SHIFT CABLE
(a) Install the two bolts and the cable bracket.
(b) Connect the cable and insert the pin.
14. CONNECT NO.1 SPEED SENSOR CONNECTOR
15. INSTALL FRONT AND REAR PROPELLER SHAFTS
(See Pub. No. RM184E, page PR-8)
16. INSTALL TRANSMISSION SELECT LEVER AND TRANS-
FER SHIFT LEVER
(a) Remove the four bolts and the transfer shift lever.
(b) Install the transmission shift lever assembly with the six
bolts.
ASSEMBLY REMOVAL
AND INSTALLATION