TRANSFER - TRANSFER DISASSEMBLY
(b) Using SST and a hammer, drive in a new oil seal.
SST 09316-60010 (09316-00010, 09316-00030)
24. REMOVE OIL RECEIVER FROM FRONT CASE
Remove the set bolt and oil receiver.
25. REMOVE TWO BEARING RACES FROM FRONT CASE
(a)
Using SST, remove the bearing race.
SST 09950-20017
(b)
Using a brass bar and hammer, remove the bearing race.
26. INSPECTION OF TRANSFER INDICATOR SWITCHES
Check that there is continuity between terminals as
shown.
If continuity is not as specified, replace the switch.
TR-11