Brake Pedal Removal And Reassembly - Suzuki RM250 Owner's Service Manual

BRAKE PEDAL REMOVAL AND REASSEMBLY
Removal
• Remove the cotter pins behind the frame.
• Loosen and remove the brake peda l pivot bolt.
• Remove the return spring.
• Remove the cotter pins and pin.
Reassembly
• Reassemble the pin, washer and cotter pins.
• Fit the return spring .
• Apply grease to the brake pedal pivot bolt. Tighten the
bolt .
• Fit the washer and cotte r pins.
• Adjust the brake pedal height.
( a
2- 12)
FRONT AND REAR BRAKES 14·11