Steering Reassembly - Suzuki RM250 Owner's Service Manual

• Remove the lower bearing with the special
toot.
09941 -84510 Bearing inner race remover
• Fit the lo w er bearing with the special tool.
09925· 18010 Steering bearin g installe r
• Fit the upper and lower outer races with the spacial tool.
09941 -34513 Steering outer race and swing arm
bearing installer
Steering Reassembly
• Apply grease to the bearings.
• Fit the steering stem , upper bearing, dust sea l and steer-
ing stem nut.
• Tighten the stee ring s tem nu t with the special tool.
09940- 14960 Steering nut soc ket wrench
Tightening torque : 45 N 'm (4 .5 kg-m . 32 .5 Ib -ftl
• Move the steering stem right and left severa l times t o
seat the bearings.
• Turn back the stee ring stem nut by
IA
to Ih t urn.
• Fit the stee ring stem head nu t and tighten it t empora ri ly .
• Remount the f ront fork. (
r:::r
15-8)
• T ighten the steeri ng stem head nut to the specified
torque.
Tightening torque : 90 N 'm (9 .0 kg-m . 65 .5 Ib-ft)
FRONT FORK ANO STEERING 15·13