Brake Fluid Replacement; Brake Pads Replacement; Front Brake Pads; Rear Brake Pads - Suzuki RM250 Owner's Service Manual

• Tighten the air bleeder valve.
Tightening torque: 8 N .m (0 .8 kg -m. 5 .5 Ib-ft)
• Pou r brake fl uid up to the UPPER line .
• Reassemble the reservoi r cap.
BRAKE FLUID REPLACEMENT
• Remove the reservoir cap.
• Connect a transparent tube to the bleeder valve and set
the other end into a receptacle.
• Loosen the bleeder valve and pump the brake lever/pe-
dal untit brake fluid stops coming out from the bleeder
valve.
• Pour brake fluid into the reservoir.
• Bleed air f rom the brake system. (
r:7
14-2)
• Reassemble the reservoir cap.
BRAKE PADS REPLACEMENT
Front Brake Pad s
• Remove the pad mounting bolts.
• Remove t he ca liper mounting bolts and ca liper.
• Remove the brake pads.
NOTE: Replace the two brake pads as a set.
• Fit the new brake pads into the caliper and tighten the
pad mounting bolts temporarily.
• Tighten the ca liper mounting bolts.
Tightening torque : 23 N .m (2 .3 kg-m. 16.5 Ib -ft)
• Tighten the brake pad mounting bolts .
Tightening torque: 20 N .m (2 .0 kg-m. 14. 5 Ib-ftl
NOTE: Pump the brake lever several times to seat the brake
pads after reassembling.
Rear Brake Pad s
• Remove the two bolts and the caliper cover.
• Remove the pad mounting bolts.
FRONT ANO REAR BRAKES 14·3