Brake Pad; Front Brake Lever Adjustment; Brake Pedal Height Adjustment - Suzuki RM250 Owner's Service Manual

Brake Pad
Inspect the brake pads for wear. If t he brake pads are worn ,
replace them w ith new ones . (
r:::r
14-3 )
Brake pad w ear limit : 1 .0 mm (0 .04 in)
NOTE:
• Pump the brake lever/pedal several times to restore the
brake pads after replacing the brake pads.
• Replace both right and left pads together when rep/acing
the brake pads.
Front Brake leve r Adjustm ent
Adjust t he brake lever pl ayas foll ows :
• Loosen lock nut
<D.
• Turn in or out adjuster
@
to obta in the specified play .
Brake lever play : 5 - 20 mm 10 .20 - 0.79 in)
• Tighten t he lock nut
cD .
.. CAUTION
Brake lever play less than 5 mm (0 .20 in) can cause brake
dragging .
Do not adju st the bra ke lever pl ay less th an 5 mm (0 .20
in ).
Brake Pedal Height Adjustment
Adjust the rea r brake pedal height as follows:
• Loosen lock nut
CD.
• Ad just the brake pedal height by turning the adjuster
®
to locate t he pedal 10 mm (0 .4 in) below the t op face of
the foot rest.
• Tighten lock nut
CD.
• Loosen lock nut
@ .
• Turn adjuste r @ t o obtain t he brake pedal play of 5 - 15
mm (0.20 - 0.59 in) at the pedal end .
• Tighten lock nut
@ .
PERIODIC MAINTENANCE 2-12
1.0 mm