Suzuki RM250 Owner's Service Manual page 112

15·4 FRONT FORK AND STEERING
• Loosen t he cente r bolt with an open end w rench on the
flat portion of fork cylinder inner rod lock nut @ and sock-
et wrenc h on the center bolt
®.
• Remove the center bolt and sealing washer from the fork
cylinder inner rod ,
.. CAUTION
Removing the lock nut and pushing the inner rod thread
into the fork cylinder will damage the inner rod oil seal.
Do not remove the inner rod lock nut
@'
• Remove the stopper plate while pressing the fork cap bolt
inward.
• Remove the fork cylinder and fork spring .
NOTE: The push rod @ ca n
come out of the inner rod w hen
the cen ter bolt is rem oved.
• Remove the dust seal
®
and the stopper ring
® .
.. CAUTION
Scratches on the inner tube could cause oil leaks.
Avoid scratching when removing .
• Compress the outer t ube fully, then pull it off .
-
~.
• " " " " " 1 1 I
@ ®
L/-Vise