Care And Maintenance Of The Regulator - Roland DWX-50 Setup & Maintenance Manual

Care and Maintenance of the Regulator

WARNING
WARNING
Drain
The regulator is equipped with a filter that becomes filled with trapped material (moisture and dust) over
time. Periodically empty the drain.
Cleaning the Bowl
If the interior of the bowl becomes soiled, remove and wash the bowl.
Before removing the bowl, be sure to bleed off the air pressure.
Failure to do so may cause danger of repute or thrown-off parts.
Clean the bowl using a neutral detergent. Never use gasoline, alcohol,
thinner, or any other solvent.
Using a solvent may degrade the bowl and cause danger of rupture.
Lower knob
Loosen Tighten
Bowl
Periodic Maintenance
Stop the supply of com-
pressed air.
Loosen the lower knob a
little at a time.
Material may spray out of the drain
at this time. Use a cloth or the like
to catch the spray and keep it from
scattering.
When the drain is emp-
tied, retighten the lower
knob.
Detach the regulator from
the machine and air hose.
P.35, "Preparing the Regulator"
Detach the bowl.
Wash it using a neutral deter-
gent.
Make sure that the bowl
dries out completely, then
retighten the bowl.
Chapter 2 Maintenance 51