About Items To Prepare Separately; Dust Collector - Roland DWX-50 Setup & Maintenance Manual

About Items to prepare separately

Dust Collector

A dust collector to collect cutting dust is necessary for this machine. You need to prepare a dust collector
separately. You should clean the dust collector regularly.
WARNING
WARNING
 Static pressure: Prepare a dust collector with 8 kPa or more.
Opening Size to Connect a Dust Collector
Unit: mm
Be sure to operate a dust collector.
The cutting waste or workpiece may catch fire or pose a health hazard.
Never use a vacuum cleaner to take up cutting waste.
Taking up fine cuttings using an ordinary vacuum cleaner may cause danger
of fire or explosion
35
Chapter 1 Installation and Setup
29 29 29