Step 6: Attaching The Regulator - Roland DWX-51D Setup Manual

STEP 6: Attaching the Regulator

WARNING
Procedure

Loosely tighten the screws on the back of the machine (for the regulator and the dust
collection hose adapter). (2 locations)
Rotate the torque driver 3 times.

Align the holes of the regulator to the screws in
ing a torque driver.
Do not supply the compressed air until the air hose is connected securely.
Failure to do so may cause an accident.
Preparing the Machine for Use
Tighten
Loosen

, and firmly tighten the screws us-
31