Ricoh 5100WD General Settings Manual page 124

4. Printer Features
Memory Usage
You can select the amount of memory used in Font Priority or Frame Priority, according to paper size
or resolution.
The default setting is Frame Priority.
• Font Priority
This setting uses memory for registering fonts.
• Frame Priority
This setting uses frame memory for high speed printing.
Copies
You can specify the number of print sets. This setting is disabled if the number of pages to print has
4
been specified with the printer driver or another command.
The default setting is 1 copies.
The number of copies can be specified from 1 to 999 by increments of one.
Blank Page Print
You can select whether or not to print blank pages.
The default setting is On.
Pages that match one of the following conditions are identified as blank.
• There are no images.
• There are images but they are outside the printable area.
• There are only blank characters.
Reserved Job Waiting Time
You can specify how long the machine waits to receive a print job before allowing other functions
such as the copier and scanner functions to interrupt it.
The default setting is Short Wait.
Printer Language
Specify the printer language.
The default setting is Auto.
Sub Paper Size
You can enable the Auto Substitute Paper Size (A4, LT) feature.
The default setting is Off.
Bypass Tray Setting Priority
Specify whether (Printer) Driver / Command or Machine Settings, has priority for determining the
paper size for the paper bypass.
The default setting is Driver / Command.
122