Ricoh 5100WD General Settings Manual page 145

2. Press [Administrator Tools].
3. Press [Address Book Management].
4. Check that [Program / Change] is selected.
5. Press the name whose code is to be registered, or enter the registered number using the
number key.
You can search by the registered name, folder name, or e-mail address.
6. Press [Auth. Info].
7. Enter the user code using the number keys, and then press the [ ] key.
If you make a mistake, press [Clear] or the [Clear/Stop] key.
8. Press [ Next] twice.
9. Select the functions to be used with the user code from "Available Functions".
10. Press [OK].
11. Press [Exit].
12. Press the [User Tools/Counter] key.
• You can enter a one-to eight-digit user code.
• To register the name, see "Registering Names".
Authentication Information
143
6