Transmission Disassembly - Honda V65 MAGNA Shop Manual

~
V65MAGNA
For servicing of the gearshift linkage, see Section 8.
TRANSMISSION DISASSEMBLY
Separate the crankcase (Section 11).
Remove the dowel pin from the crankcase.
Inspect the backlash of each gear.
SERVICE LIMIT:
Low: 0.24 mm (0.009 in)
2nd, 3rd, 4th, 5th, 6th: 0.18 mm (0.007 in)
Remove the mainshaft and countershaft.
Remove the output gear case.
Index the countershaft bearing holder to the output
gear case, for ease of reassembly.
NOTE:
When removing the countershaft, pull the
countershaft with remaining gears out of
crankcase after removing the C1, C5, C2, C3
gears, spline washers, plain washers and bush-
ings in the crankcase.
TRANSMISSION
MAINSHAFT
C3 GEAR C5 GEAR
Date of Issue: Dec, 1982
©
HONDA MOTOR CO., LTD.
183
13-