Clutch Master Cylinder - Honda V65 MAGNA Shop Manual

CLUTCH
CLUTCH MASTER CYLINDER
DISASSEMBL Y
Drain clutch fluid from the hydraulic system.
Remove the left rear view mirror and clutch lever.
Disconnect the clutch switch wires and remove
the clutch hose.
CAUTION:
A void spilling clutch fluid on painted surfaces.
Place a rag over the fuel tank whenever the
clutch system is serviced.
NOTE:
When removing the oil bolt, cover the end of
the hose to prevent contamination and secure
the hose.
Remove the master cylinder.
Remove the push rod boot, and circlip from the
master cylinder body.
Remove the piston and secondary cup.
Remove the primary cup and spring.
Remove the clutch switch, if necessary.
~
V65MAGNA
OIL BOLT
SNAP RING PLIERS
07914-3230001
CLUTCH MASTER
7-6 96
Date of Issue: Dec, 1982
©
HONDA MOTOR CO., LTD.