Oki ES9476 MFP Hardware Troubleshooting Manual page 58

1.TROUBLESHOOTING FOR THE HARDWARE
10 Confirm that the paper size is correctly detected if you selected [Auto (mm)] or [Auto (inch)] in
step 8.
The detected paper size is indicated on the tray button in the equipment status indication area on the left.
An incorrect paper size or "
 P.9 "When This Screen Is Displayed"
Try copying or printing again.
11
 Jam when making copies or prints (using the MPT)
Clear the paper jam following the guidance shown on the touch panel. Then close all the covers.
1
Press [Yes] when "Cancel print job?" appears.
2
The print job is canceled.
If you do not want to cancel the print job
To restart the job without canceling it, replace the paper on the MPT with that corresponding to the size set in the
equipment after the paper jam is cleared. Then if you press [No] in step 2, the job can be restarted. In this case, it
is not necessary to follow step 3 and later.
Place the paper on the MPT and set the paper size.
3
Try copying or printing again.
4
58 Clearing a Paper Jam
" indicates an unsuccessful detection. In this case, see the following page.