Controls & Components - Grizzly G0808 Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–7 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
Control Panel
A
B
C
D
Figure 1. Control panel controls.
A. Digital Readout: Displays spindle RPM.
B. Spindle Direction Switch: Selects direction
of spindle rotation.
C. Emergency Stop/Reset Button: Stops all
machine functions. Twist clockwise to reset.
D. Spindle Speed Dial: Selects spindle speed
from 0–2500 RPM.
E. ON/OFF Buttons: Starts and stops spindle
rotation.
-4-
manual BEFORE
E
Headstock
F
P
O
N
Figure 2. Headstock controls.
F. Depth Stop: Stops downward spindle travel
at pre-determined depth.
G. Spindle Speed Range Lever: Selects
between low and high spindle speed ranges.
H. Headstock Tilt Locking Nuts: Secure head-
stock tilt setting.
I. Headstock Tilt Scale: Indicates angle of
headstock tilt from 30° left to 90° right.
J. Coarse Downfeed Levers: Provide coarse
control over vertical spindle travel.
K. Downfeed Selector Knob: Engages/disen-
gages fine downfeed handwheel.
L. Fine Downfeed Handwheel: Provides fine
control over vertical spindle travel.
M. Spindle and Quill: Holds tooling for drilling
operations.
N. Depth Stop Adjustment Knob: Determines
depth of cut.
O. Quill Lock: Locks quill in position.
P. Depth Scale: Indicates depth of cut.
Model G0808 (Mfd. Since 11/15)
G H
I
J
K
L
M