Paper Tray Does Not Close; Condensation Has Formed Inside The Printer - Xerox versalink C7020 User Manual

Troubleshooting

Paper Tray Does Not Close

Probable Causes
The paper tray does not close fully.

Condensation has Formed Inside the Printer

Moisture can condense inside a printer where the humidity is above 85% or when a cold printer is
located in a warm room. Condensation can form in a printer after it has been sitting in a cold room that
is heated quickly.
Probable Causes
The printer has been sitting in a cold room.
The relative humidity of the room is too high. • Reduce the humidity in the room.
226 Xerox VersaLink
®
User Guide
Solutions
Some debris or an object is blocking the tray. Power off the
printer, then remove the obstruction or debris. If you cannot
remove it, contact your Xerox representative.
Solutions
Allow the printer to operate for several hours at room
temperature.
• Move the printer to a location where the temperature and
C7020/C7025/C7030 Color Multifunction Printer
®
relative humidity are within the operating specifications.