Moving The Printer - Xerox versalink C7020 User Manual

Maintenance

Moving the Printer

Before you move the printer:
• Ensure that you always power off the printer and wait for it to shut down completely.
• Ensure that no jobs are in the print queue.
• Disconnect the power cord and other cables from the back of the printer.
WARNING: To prevent electric shock, never touch the power plug with wet hands. When
removing the power cord, ensure that you pull the plug and not the cord. Pulling the cord can
damage it, which can lead to fire or electric shock.
Note:
• When moving the printer, do not tilt it more than 10 degrees in any direction. Tilting the printer
more than 10 degrees can cause toner spillage.
• When moving the printer over a long distance, remove the drum cartridge and toner cartridges
to prevent toner from spilling. Pack the printer inside a box.
CAUTION: Do not expose the drum cartridge to direct sunlight or strong indoor fluorescent
lighting. Do not touch or scratch the surface of the drum.
CAUTION:
Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
The Xerox Warranty, Service Agreement, or Total Satisfaction Guarantee do not cover
®
damage to the printer caused by improper moving.
After moving the printer:
1. Reinstall any parts that you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and power on the printer.
220 Xerox VersaLink
®
User Guide
® Warranty, Service Agreement, or Total Satisfaction Guarantee.
C7020/C7025/C7030 Color Multifunction Printer
®