Xerox versalink C7020 User Manual page 25

Item Name
4 NFC Area
(Optional)
5 Status LED
6 Notification Banner
7 Pause Icon
Description
Near Field Communication (NFC), is a technology that enables devices to
communicate when they are within 10 cm (4 in.) of each other. Use the NFC
area to obtain a network interface or to establish a TCP/IP connection
between your device and the printer.
Note: The indicator is visible when NFC is activated.
This light blinks blue or amber to indicate printer status.
Blue
• Blinks blue once to acknowledge a successful Authentication request.
• Blinks blue once slowly for a copy or print job initiated at the control
panel.
• Blinks blue twice slowly for fax or print job received from the network.
• Blinks blue rapidly while the printer is powering up, or to signal detection
of a Wi-Fi Direct connection request.
Amber
• Blinks amber to indicate an error condition or warning that requires your
attention. For example, an out of toner condition, a paper jam, or out of
paper for the current job.
• It also blinks amber to indicate a system error, which typically is
associated with an error code.
Notifications and messages are displayed in a pop-up banner below the apps
area. To view the full notification, touch the center of the banner. After you
have reviewed the information, touch X to close.
When a job is being scanned or processed, a Pause icon appears in the
notification banner area. To pause the current job, touch the Pause icon.
The job pauses with the option to resume or delete the job.
Xerox VersaLink C7020/C7025/C7030 Color Multifunction Printer
® ®
Getting Started
25
User Guide