Xerox versalink C7020 User Manual page 207

4. Remove the new staple cartridge from its packaging. Hold the tabs on both sides of the new staple
cartridge, then reinsert the staple cartridge into the original position in the finisher.
Note: The booklet maker uses two staple cartridges. Booklet stapling requires that both staple
cartridges contain staples.
5. Repeat the procedure for the other staple cartridge.
6. Close the finisher side cover.
Replacing Staples in the Convenience Stapler
1. To open the stapler head, rotate the stapler head 180 degrees counterclockwise.
2. Grip the staple cartridge and pull it out of the stapler head.
3. Unpack the new staple cartridge. Remove any partial strips and any staple strips that are not flat.
Xerox VersaLink C7020/C7025/C7030 Color Multifunction Printer
® ®
Maintenance
207
User Guide