BRAKE PAD INSPECTION/BRAKE SHOE INSPECTION/
BRAKE LIGHT SWITCH ADJUSTMENT
3-25
EB304030
BRAKE PAD INSPECTION
1. Operate the brake lever.
2. Inspect:
S Brake pad
Wear indicators 1 almost touch the brake
disc ! Replace the brake pads as a set.
Refer to "REAR WHEEL AND REAR
BRAKE" in CHAPTER 6.
EB304040
BRAKE SHOE INSPECTION
1. Operate the brake pedal.
2. Inspect:
S Brake shoes
Wear indicator 1 reaches the wear limit
line 2 ! Replace the brake shoes as a
set.
Refer to "REAR WHEEL AND REAR
BRAKE" in CHAPTER 6.
EB304050
BRAKE LIGHT SWITCH ADJUSTMENT
NOTE:
The brake light switch is operated by movement
of the brake pedal.
Adjustment is correct when the brake light
comes on just before the braking effect starts.
1. Check:
S Brake light operation timing
Incorrect ! Adjust.
2. Adjust:
S Brake light operation timing
*****************************************************
Adjustment steps:
D Hold the main body 1 of the switch so that it
does not rotate, and turn the adjuster 2 in or
out until the proper operation timing is ob-
tained.
brake light comes on
Turning in:
later.
brake light comes on
Turning out:
sooner.
*****************************************************
INSP
ADJ