Middle Driven Pinion Gear Installation - Yamaha XVS6501997 Service Manual

MIDDLE GEAR
MIDDLE DRIVEN PINION GEAR
INSTALLATION
1. Install:
S Spring retainers
NOTE:
Attach the damper spring compressor 1 on the
spring seat 2 and compress the damper
spring, then install the spring retainers.
Damper spring compressor:
90890-04090
2. Install:
S Bearing
*****************************************************
Installation steps:
D Install the new bearing by reversing the re-
moval steps.
NOTE:
Use a socket 1 that matches the diameter of
the outer bearing race and the oil seal.
CAUTION:
Do not contact the bearing center race 2 or
balls 3 . Contact should be made only with
the outer race 4 .
*****************************************************
3. Install:
S Bearing retainer 1
*****************************************************
Install steps:
D Attach the folded rag 2 .
D Secure the bearing housing edge in the vise.
D Attach the bearing retainer wrench 3 .
Bearing retainer wrench:
90890-04057
D Tighten the bearing retainer.
CAUTION:
The middle driven shaft bearing retainer has
left-handed threads. To tighten the retainer
turn it counterclockwise.
Bearing retainer:
110 Nm (11.0 mSkg)
*****************************************************
4-75
ENG