Gloss Problems; Glossy Lines - Ricoh PRO C5200S Operating Instructions Troubleshooting: Tcru/Oru

Gloss Problems

Glossy Lines

Glossy lines appear every 20 or 26.5 mm (0.8 or 1.0 inches).
Cause:
This may occur if coated or thin paper is used.
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Registering a Custom Paper", Paper Settings Reference.
• If the glossy lines appear at irregular intervals, you cannot resolve the problem with this procedure.
Contact your service representative.
• Decreasing the fusing temperature may produce one or more of the following side effects:
• Insufficient toner fusing
• Insufficient gloss
• Halftone images on uncoated paper are soiled
Solution:
1. Print the image on twenty sheets. Do glossy lines appear on the tenth sheet and later
sheets?
Yes Go to the next step.
No You cannot resolve the problem with this procedure. Contact your service representative.
20 mm or 26.5 mm
(0.8 or 1.0 in.)
CEZ570
Gloss Problems
61