Troubleshooting Service Call Problems (Sc Codes); What Are Sc Codes; If An Sc Code Appears - Ricoh PRO C5200S Operating Instructions Troubleshooting: Tcru/Oru

2. Troubleshooting Service Call
Problems (SC Codes)

What Are SC Codes?

If an error occurs during operation, the machine displays an SC code ("SCnnn", where "nnn" is a three-
digit number). The machine stops and cannot be used when an SC code is displayed.

If an SC code appears:

1. Write down the SC number.
2. Turn off the main power switch.
3. Wait a few moments, then turn the machine on again.
In most cases, cycling the machine off and on will restore it to full operation.
4. If the SC code reappears, check it against the SC code table. For details, see
"SC Code List".
Check for the SC code in the table.
If the SC code is listed in the table, carry out the recommended procedure.
If the SC code is not listed in the table, contact your service representative.
page 14
13