Ricoh PRO C5200S Operating Instructions Troubleshooting: Tcru/Oru page 45

The top and
bottom are fainter
or denser.
(B) The density is uneven in a part of the image.
The leading edge
is fainter.
Affected area
Affected area
Solution
1. In the [Machine: Image
Quality] group on the
[Adjustment Settings for
Skilled Operators] menu,
select [Adjust Image
cez554
Density/ DEMS] and
execute [Image Density
Adjustment: Manual
Execute].
2. If the problem persists,
contact your service
representative.
Solution
1. In the [Machine: Image
Quality] group on the
[Adjustment Settings for
Skilled Operators] menu,
select [Adjust Image
cez555
Density/ DEMS] and
execute [Image Density
Adjustment: Manual
Execute].
2. If the problem persists, see
page 46 "Fainter
Leading Edge".
Density Problems
43