Delivered Sheets Are Not Stacked Properly (Finisher Sr5070 / Booklet Finisher Sr5080) - Ricoh PRO C5200S Operating Instructions Troubleshooting: Tcru/Oru

5. Post-Processing Option Troubleshooting
Paper Weight
2
Paper Weight
3
Paper Weight
4
Paper Weight
5
Paper Weight
6
Paper Weight
7
Paper Weight
8
Paper Weight
9
*1 Paper deflection may occur. In such case, output paper to the finisher shift tray.
*2 When using paper larger than A3 size, use the thin paper support tray.
*3 Paper extrusion may occur. In such case, output paper to the finisher shift tray.
*4 Do not use this weight in the direction perpendicular to the feeding direction.
Delivered Sheets Are Not Stacked Properly (Finisher SR5070 / Booklet
Finisher SR5080)
Solution:
Depending on the cause of the problem, do one of the following:
88
Finisher upper tray
Paper weight
2
(g/m )
Plain paper
*1
66.0 - 80.9
81 .0- 100.9
101.0 - 127.4
127.5 –
150.0
150.1 –
216.0
216.1 –
-
256.0
256.1 –
-
300.0
300.1 –
-
360.0
Finisher shift tray
Coated
Plain paper
*3
paper
*1
*1
-
-
-
Coated paper
*2