Denso BHT-7000 User Manual page 83

[5.6] File test
TEST FILE
SAMPLE01.PD3
SAMPLE02.PD3
SAMPLE03.PD3
SAMPLE04.PD3
SIZE:XXXXX
FREE:YYYYY
TEST FILE
SAMPLE01.PD3
00004096 bytes
OK
SIZE:XXXXX
FREE:YYYYY
TEST FILE
SAMPLE01.PD3
00004096 bytes
NG
SIZE:XXXXX
FREE:YYYYY
If a defective file is found, delete it or overwrite it with the same name file.
Even defective, the file can be uploaded on the UPLOAD menu. It is, therefore,
recommended that important files be uploaded before deleted.
* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of
, and keys, respectively
Chapter 2. Getting Started the BHT-7000 and System Mode
Selecting "6:FILE" on the TEST menu calls up the
screen shown at left.
If any of the files stored in the memory is defec-
tive, an asterisk (*) will be prefixed to the name of
the defective file(s).
If you select a file on this screen by using the
and * keys, the file size and the test result will
appear. If there are more than four files, the screen
will scroll.
Highlighted is the currently selected file.
Press the C key to return to the TEST menu.
The file name, file size, and test result (OK or NG)
appear as shown at left.
Press the C key to return to the file selection
screen.
67
*
, ,