Table of Contents
Advertisement
Defining the function of M1 , M2 , M3 (left-hand trigger switch), or M4 (right-hand
trigger switch) key
SET M3 KEY
1:None
2:Trigger Switch
3:Shift Key
4:Enter Key
5:Backlight Key
Magic keys
The M3 and M4 keys are assigned the trigger switch function by default. You can
make them function as the SF key, ENT key, or backlight function on/off key.
If you define the M1 key as the backlight function on/off key, pressing the M1 key
activates or deactivates the backlight function.
In user programs, a string data also can be assigned to these magic keys.
The backlight function on/off key can be assigned only to any one of M1 through
M4 keys. The key defined more recently will act as the backlight function on/off
key and one defined earlier will be ignored.
That is, if you define the M1 and M2 keys as the backlight function on/off key in
this order, the M2 key will work as the backlight function on/off key and the M1
key's entry will be ignored.
* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of
, and
keys, respectively
Chapter 2. Getting Started the BHT-7000 and System Mode
Selecting the "2:M1 KEY," "3:M2 KEY," "4:M3 KEY"
or "5:M4 KEY" on the SET KEY menu calls up the
screen as shown at left. (This example appears
when the "4:M3 KEY.")
Highlighted is the current setting.
The M1 , M2 , M3 or M4 key can function as
listed below.
1 None:
2 Trigger Switch:
3 Shift Key:
4 Enter Key:
5 Backlight Key:
Select a desired setting by using the numerical
keys or
* and
ENT
key. The screen returns to the SET KEY
menu.
59
The key entry will be ig-
nored.
As a trigger switch.
As an SF key.
As an ENT key.
As a backlight function on/
off key.
* keys, and then press the
,
,
Advertisement
Chapters
Table of Contents
