Denso BHT-7000 User Manual page 63

[4.1] Setting an execution program
SET EXECUTE PROGRAM
SAMPLE01.PD3
SAMPLE02.PD3
SAMPLE03.PD3
SAMPLE04.PD3
SET EXECUTE PROGRAM
******************
* NO FILE EXISTS *
******************
[4.2] Setting the message version
SET DISPLAY
MESSAGE
English Japanese
* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of
, and keys, respectively
Chapter 2. Getting Started the BHT-7000 and System Mode
Selecting "1: EXECUTE PROGRAM" on the SET
SYSTEM menu calls up the screen shown at left.
Highlighted is the current setting.
Use the
* and
desired execution program to be run when the
power is applied, and then press the ENT key.
To return to the SET SYSTEM menu, press the
C key.
If no program files are stored in the memories, the
screen shown at left will appear.
To return to the SET SYSTEM menu, press the C
key.
Selecting "2: DISPLAY" on the SET SYSTEM menu
calls up the screen shown at left.
Highlighted is the current setting.
MESSAGE: Switches the message version to En-
glish or Japanese for system error
messages and indications on the
LCD contrast, beeper volume, and
battery voltage level screens. (The
default is the message version that
you selected in the initializing se-
quence.)
Select a desired setting by using the
keys.
Press the ENT key.
To return to the SET SYSTEM menu, press the C
key.
47
* keys to move the cursor to a
* and *
, ,