Table of Contents
Advertisement
26-key pad
BS (Backspace) key
Moves back one
character.
PW (Power) key
Turns the BHT on or
off.
Numerical keys
Used for numerical
input.
F5-F8 Cursor keys
Used to move up to the
preceding line, down to
the next line, to the
preceding character, and
to the next character.
Chapter 2. Getting Started the BHT-7000 and System Mode
Status Indicators
Battery voltage level
Shows the current battery voltage level.
If the voltage level is high, three bars appear; if low, a
single bar appears.
The displayed battery level shows the terminal volt-
age of the battery cartridge, not how much power is
left.
Keypad shift state
Shows a bar when the keypad is shifted.
SF
Alphabet input
Shows a bar when the alphanumeric entry system is se-
ALP
lected. (For the alphanumeric entry, refer to the "BHT-BA-
SIC Programmer's Manual.")
M1/M2 (Magic) keys
Used as any of the ENT
key, trigger switch, SF
key, and backlight function
on/off key depending upon
definition in System Mode
or in user programs.
These keys can be also
assigned string data.
17
C (Clear) key
Clears the last
inputted data or
returns to the original
screen.
SF (Shift) key
Used in combination
with numerical keys
for special input
procedures.
ENT (Enter) key
Finalizes the inputted data or
operations, and starts the
corresponding processing.
Function keys
Used for choosing functions.
Advertisement
Chapters
Table of Contents
