Denso BHT-7000 User Manual page 72

[4.5-3] Setting the interface port
SET COM DEFAULT PORT
1:BASIC
Optical Connector
2:SYSTEM MODE
Optical Connector
* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of
, and keys, respectively
Selecting the "3:COM PORT" on the SET COMMU-
NICATION menu calls up the screen shown at left.
Highlighted is the current setting.
1 BASIC:
2 SYSTEM MODE:
Select a desired item by using the numerical keys
or * and * keys, and then select a desired
setting by using the
To return to the SET COMMUNICATION menu,
press the C key.
56
Selects the optical or direct-
connect interface port to be
used for user programs
written in BHT-BASIC
(OPEN "COM:" or XFILE
statement).
Selects the optical or direct-
connect interface port to be
used for downloading or
uploading files in System
Mode.
* and * keys.
, ,