Table of Contents
Advertisement
Your settings in
System Mode
have been lost.
Will reset
to defaults.
Reload the battery
to restart!
E:xxxxxxxx-F:xxxxxxxx
1:xxxxxxxx-2:xxxxxxxx
P:xxxxxxxx-R:xxxxxxxx
Error in System Mode settings
Problem
Your settings made in System Mode contain an er-
ror.
If this error occurs, the System Mode settings
revert to the factory defaults.
The BHT displays this error for three seconds
and then displays the "No execution program
selected..." message.
Solution
Make your settings in System Mode again.
System down error
Problem
An error has occurred during execution of System
Program.
If this error occurs, the BHT beeps five times
(for 0.1 second per beep).
Solution
Unload and reload the battery cartridge, then turn
on the power.
If this error occurs frequently, make a note of the
message and codes on the LCD and contact your
nearest dealer.
108
Advertisement
Chapters
Table of Contents
