Denso BHT-7000 User Manual page 57

If an error occurs during downloading
If some error occurs during downloading, the BHT beeps three times and shows one of
the following screens with the prompt "Retry?":
To retry the download, press the 1 and ENT keys; to abort it, press the 2 and
ENT keys.
DOWNLOAD FILE
XXXXXXXX.XXX
Out of memory!!
Retry?
1:Yes 2:No
DOWNLOAD FILE
XXXXXXXX.XXX
Too many files!!
Retry?
1:Yes 2:No
DOWNLOAD FILE
XXXXXXXX.XXX
Communication error!!
Retry?
1:Yes 2:No
Chapter 2. Getting Started the BHT-7000 and System Mode
Problem
The memory is insufficient for storing files to be
downloaded.
Solution
Press the 2 key to return to the SYSTEM MENU,
then delete unnecessary files in the memory or
decrease the size of the file to be downloaded.
(Refer to Subsection 2.6.3, [ 7 ] and [ 2 ].)
Problem
The current download will exceed the maximum
of 80 files in the memory.
Solution
Press the 2 key to return to the SYSTEM MENU.
Delete unnecessary files in memory or decrease
the number of files to be downloaded if you at-
tempted to download more than one file (Refer to
Subsection 2.6.3, [ 7 ] and [ 2 ].)
Problem
Downloading has failed.
Solution
To retry downloading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key.
Check the interface port and communications pa-
rameters in the SET SYSTEM menu or perform the
communications test in the TEST menu. (Refer to
Subsection 2.6.3, [4.5] and [5.7].)
It is also necessary to check the communications
parameters setup of the host computer.
41