Lacp Key; Lacp Port-Priority - Planet Networking & Communication MGSW-28240F Command Manual

Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # lacp

4.2.56.41 lacp key

Command:
lacp key <1-65535> | auto
lacp Enable LACP on this interface
key Key of the LACP aggregation
<1-65535> Key value
auto Choose a key based on port speed
Default:
Auto
Usage Guide:
To configure LACP key for specific interface
Example:
To configure LACP key (555) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # lacp key 555

4.2.56.42 lacp port-priority

Command:
lacp port-priority <1-65535>
lacp Enable LACP on this interface
port-priority LACP priority of the port
<1-65535> Priority value, lower means higher priority
Default:
32768
Usage Guide:
To configure LACP port-priority for specific interface
Command Guide of MGSW-28240F
-101-