Honeywell NEXPTZ-PD Installation And Operation Manual page 5

Methods of Installation
Sealing
Fiber Filler
compound
Sealing Method
Explosion proof
Flexible conduit
PT 3/4 "-14
(Not Supplied)
Seal Fitting
(Not Supplied)
To install this product, please refer to Figure3 and do the following steps.
1. Make sure the threads of the supplied four M10X30mm stainless steel bolts (Not Supplied) and flat/spring
washers are free of dirt and debris.
2. Apply an amount of thread locking compound(not supplied) to the thread of the product and the thread of
the bolts.
3 There are more options such as wall, corner and pole mount bracket to install. (refer to the mount bracket
part page)
4. Make sure the seal fitting(not supplied) and the threaded hole of this system are free of the dirt and
particles.
5. Assemble Nipple(supplied), the threaded hole of this system, seal fitting and flexible conduit(not supplied)
to be fasten firmly and then the cables must be passed through the seal fitting, nipple and flexible conduit.
Plus, the sealing fitting, flexible conduit should be acquired IECEx Certification.
Note : Figure3 shows the product being installed on a surface with pedestal mount.
Cables
PT 3/4"-14 Nipple
(Supplied)
Install Product to the surface with Pedestal mount bracket
Figure3.
- 5 -