Honeywell NEXPTZ-PD Installation And Operation Manual page 30

Program and Operation
5. SETUP
Locate the cursor on Setup item in the main menu and push the joystick to the right for Setup
programming of the camera.
5.1 INSTALLATION (MENU => Setup => Installation)
This function can make the installation on the normal surface or ceiling when the NEXPTZ
Camera is mounted.
NORMAL : When a Camera is installed on the floor, objects can be displayed normally.
CEILING : When a Camera is installed on the ceiling, objects can be displayed normally.
5.2 SPEED (MENU => Setup => Speed)
: 60 °/ sec (MAX)
FAST
: 10 °/ sec
SLOW
: 30 °/ sec
MID
Main Menu
Function
Alarm
Screen
Camera
Setup
Password
Communication
Run Function
Exit
Setup Menu
Installation : NORMAL
Speed : FAST
Panning Range
Calibration
Factory Default
Erase Data
System Information
Save And Exit
- 30 -