Honeywell NEXPTZ-PD Installation And Operation Manual page 24

Program and Operation
To adjust the "marked" (privacy) area, press zoom button or twist the Joystick to enter
4.
control mode and then use the Joystick (direction and zoom) until you get desired view.
Press the Focus button to exit from control mode, the right column will be set to ON.
5. You can overwrite an existing zone. Use the Home key to delete the marked zone, or
push the Joystick to the right or left to turn the stored zone On or Off.
6. Select the mask color by pushing the Joystick left or right
7. Select the Save and Exit option by pushing the Joystick up or down. Save and exit the
program by pushing the Joystick to the right. Press ESC to exit the program without
saving.
Press the HOME or OFF button to delete programmed privacy zone.
3.2 NORTH DIRECTION (MENU => Screen => North Direction)
Push the joystick handle to the right to select NORTH DIRECTION options
Move to POSITION item to set north direction, use the Joystick (direction and zoom) until you get
desired direction. Release the key then current pan angle will be displayed on position item.
(Or twist zoom handle or hit zoom button to start PTZ control for view selection and hit the Focus
Button to exit from control mode.)
3.3 ZONE TITLE (MENU => Screen => Zone Title)
Enter a specific name in sectioned angle between START and END.
North Direction
Position : ---.-
Save And Exit
Zone Title
No Title
01 WINDOW
02
03
04
05
06
PREV NEXT
Save And Exit
01/03
Start End
123.4 345.6
----- -----
----- -----
----- -----
----- -----
----- -----
- 24 -