Honeywell NEXPTZ-PD Installation And Operation Manual page 25

Program and Operation
1. Press MENU => SCREEN => ZONE TITLE to display zone title menu on the monitor.
2. Select the zone number by pushing the Joystick up or down. Select Start, End or number
column to be set by pushing the handle to the right or left. The selected column will be
highlighted.
3. Twist the joystick handle on the No. column to enter zone title. You can select alphanumeric
characters by rotating the handle. Move to the next character by pushing the Joystick to the
right. To finish entering the title, push the Joystick to the right or left on "Save and Exit".
4. To adjust panning limit, twist the Joystick. Then use the Joystick to go the desired direction.
The end limit must be in an increasing direction. (Start < End). (Or twist zoom handle or hit
zoom button to start PTZ control for view selection and hit the Focus button to exit from
control mode.)
5. PREV NEXT : got to previous page or next page of the menu.
6. Save and exit the program by pushing the Joystick to the right. Press ESC to exit the
program without saving.
3.4 CAMERA TITLE (MENU => Screen => Camera Title)
Push the joystick handle to the right to select CAMERA TITLE options
1. Twist the joystick handle on the TITLE : CAM No. to enter camera title. You can select
alphanumeric characters by rotating the handle. Move to the next character by pushing the
Joystick to the right. Camera title is limited to 10 characters.
To finish entering the title, push the Joystick to the right or left on "Save and Exit".
2. Save and exit with joystick handle to right (Or ESC to exit without saving)
Camera Title Setup
Title : CAM No.
Save And Exit
- 25 -