Honeywell NEXPTZ-PD Installation And Operation Manual page 22

Program and Operation
1. Press Menu to display the main menu on the monitor. Select the Alarm option by pushing
the Joystick up or down and push to right to enter the detail menu.
2. Select the alarm input number by pushing the Joystick up or down and select the column
you wish to setup. Selected position will be highlighted.
3. Select the Preset, Status of Input (NC/NO/OFF), and Output (RO1/RO2/OFF) by pushing the
Joystick to the right or to the left.
4. To increase or decrease the preset number or to change the status or output number, twist
the Joystick clockwise or counterclockwise. In case of preset, programmed preset number
will be scrolled.
5. Locate the cursor on Save and exit and push the Joystick to the Save and exit.
Press ESC to exit the program without saving.
3. SCREEN
Pressing the MENU button on the keyboard controller, the following On-screen MAIN MENU will
be shown on your monitor screen.
Locate the cursor on the SCREEN item and then push the joystick to the right to enter SCREEN
menu.
Main Menu
Function
Alarm
Screen
Camera
Setup
Password
Communication
Run Function
Exit
Screen Setup
Privacy Zone
North Direction
Zone Title
Camera Title
OSD Display
Exit
- 22 -