Honeywell NEXPTZ-PD Installation And Operation Manual page 14

Program and Operation
The Home function applied to the predefined functions such as Preset, Tour, Pattern, or Scan
function after the keyboard controller has been idle for a programmed time.
Follow the steps below to program the Home function:
1.Select the camera number by pressing No. and CAM
2.Press MENU to display the main menu on the monitor.
3.Push the Joystick to the right on "FUNCTION".
4.Enter Home Function menu by pushing the Joystick to the right.
5.Push the Joystick to the right/ left (or twist CCW/CW) to scroll Tour, Auto Scan and Preset
functions.
6.Select Function Number by pushing the Joystick down, and twist the Joystick to the
CCW/CW (or push right/left). The executable function number will be scrolled. If selected
function is not programmed, it won't change. Go to setup function first.
7.Pushing the Joystick down and twist the Joystick to CCW/CW (or push the stick to
right/left) to set waiting time.
8. Locate the cursor on OPERATION option by pushing the Joystick down. Choose
operation status Enable or Disable by pushing the Joystick to the right or to the
left (or twist CCW/CW).
1.2 PRESET (MENU =>FUNCTION => PRESET ; Short cut : Preset)
Preset memorizes pan, tilt, zoom, focus and iris settings. Once programmed, pressing combination
of 0 ~9 numbers and a Preset button on your controller automatically calls up the preset position.
Presets may be assigned to alarm actions or as the "home" position for the NEXPTZ camera.
Locate the cursor on the PRESET item and then push the joystick to the right to enter PRESET
menu.
Function
Home Function
Preset
Scan
Tour
Pattern
EXIT
- 14 -