Honeywell NEXPTZ-PD Installation And Operation Manual page 18

Program and Operation
1.3 TOUR (MENU => Function => Tour ; Short cut : TOUR)
There are 4 programmable Tours. Each Tour consists of up to 32 Preset positions, Patterns, Scans ,
or other Tours. Using second-level Tours, it can be expanded to over 56 functions in a single Tour.
However tours second level Tours will be ignored when called by a Tours. This can be best
illustrated by the following example:
If Tour 01 : Preset 02, Preset 03,Tour 02, Tour 03
Tour 02 : Preset 05, Preset 06,
Tour 03 : Preset 07, Pattern01
Tour 04 : Preset 08. Preset 05, Pattern01
Tour01 executes as follows:
Preset 02  Preset 03  Preset 05  Preset 06  Preset 05  Preset 07
Pattern01  ... (Repeat) ---Tour 04 in Tour 02 will be skipped in Tour 01
Tour02 executes as follows:
Preset 05  Preset 06  Preset 08  Preset 05  Pattern01  Preset05
...Repeat (Tour4 is still valid if called directly from Tour2.)
Tour
TOUR 01:xxxxxxxxxxxx
FUNC NO S DW TITLE
PRST 001 S 03 ----------------
SCAN 016 S 03 ----------------
TOUR 008 S 03 ----------------
---- --- - -- ----------------
---- --- - -- ----------------
---- --- - -- ----------------
---- --- - -- ----------------
PREV NEXT
SAVE AND EXIT
xxxxx : 16 digits of title for tour label
- - - : blank preset position
Speed : Fast (Normal)/ Slow
DWell : 01-99 Sec
PRST : Preset 1~128
PTRN : Preset 1~4
SCAN : SCAN 1~8
TOUR : TOUR 2~4
04, Preset 05
01/04
- 18 -