Universal Flat-Faced Flange - Siemens SITRANS LR560 Operating Instructions Manual

Universal flat-faced flange

WARNING: The user is responsible for the selection of bolting and
gasket materials which will fall within the limits of the flange and its
intended use and which are suitable for the service conditions.
Universal flat-faced flange dimensions and Aimer
bolt hole circle
max. diameter
45 °
bolt hole circle
min. diameter
thickness
Flange
Pipe
O.D.
Size
80 mm 200 mm
(3") (7.87")
100mm 229 mm
(4") (9.00")
150 mm 285 mm
(6") (11.22")
1)
Universal flanges mate with EN 1092-1 (PN16)/ASME B16.5 (150 lb)/JIS 2220 (10K) bolt
hole pattern.
Page 18 SITRANS LR560 (mA/HART) – OPERATING INSTRUCTIONS
flange O.D.
Thick- Bolt Hole
ness (s) Circle Max Ø
9.65 mm 160 mm
(0.38") (6.30")
9.65 mm 191 mm
(0.38") (7.52")
9.65 mm 242 mm
(0.38") (9.53")
1)
number of slotted bolt holes
Bolt Hole Bolt Hole
Circle Min Ø radius
150 mm 9.5 mm
(5.91") (0.37" )
175 mm 9.5 mm
(6.89") (0.37")
240 mm 11.5 mm
(9.45") (0.45")
bolt hole radius
section A-A
No. of
Slotted
Holes
8
8
8
A5E34647946