Appendix F - Usb Operation; Overview; Usb Options; Download Log Files - Graco HFR Setup And Operation

Appendix F - USB Operation

Overview

There are 3 main uses for the USB on a GMS system:
• Ability to download a log of up to the past 50,000
errors, events, or jobs that can contain over 150,000
snapshots of critical dispense information
• Ability to download, modify, and upload custom lan-
guage files
• Ability to download and upload system configura-
tions
• This data includes most user selectable and
user configurable settings.
• This data does not include pump counters, error
and event logs, shot and sequence counters.

USB Options

The only options for USB on the ADM are in Advanced
Screen 4, see page 68.
The first option is a checkbox that enables or disables
the downloading of the Error Event and Shot Data log
files. The Shot Data log runs during all circulation, shots,
and operator modes.
The second option is the Erase icon which will reset the
last download date to a time where all logs can be
downloaded. This will allow the user to download all the
USB log entries, which may take over 2 hours if the log
files are full. Currently the ADM does not monitor the
USB logs and alert the user when data may be overwrit-
ten so in order to minimize download times and the risk
of losing data it is recommended that the user download
the logs every 2 weeks or more often if the machine is
used during more than one full shift a day.
3A2797R
The third option is a checkbox that enables or disables
the ability to record errors associated with the USB logs.

Download Log Files

If the "Enable Downloading of USB Logs" is checked,
the user can use a USB stick-drive to download the log
files.
NOTICE
Low-quality USB stick drives may lead to burning
out the USB port on the ADM. Use only high-quality
USB stick-drives with the ADM USB port.
To download the log files, insert a high-quality USB
stick-drive into the USB port in the bottom of the ADM.
The ADM will automatically begin downloading the log
files as well as the custom language file (DISP-
TEXT.TXT) and the system settings (SETTINGS.TXT).
The status of the download will be shown in the Status
bar.
Appendix F - USB Operation
91