Technical Data - Graco HFR Setup And Operation

Technical Data

HFR for NVH Foam
Maximum fluid working pressure
Maximum Fluid Temperature
Fluid Inlet Feed Pressure Range
Fluid Inlet:
Component A (Red)
Fluid Inlet:
Component B (Blue)
Fluid Outlet:
Component A (Red)
Fluid Outlet:
Component B (Blue)
Fluid Circulation Ports
Line Voltage Requirement:
230V / 3 phase Models
Line Voltage Requirement:
400V / 3 phase Models
Amperage Requirement
Sound Power
Heater Power
(A (Red) and B (Blue) heaters total, no hose)
Hydraulic reservoir capacity
Recommended hydraulic fluid
Weight:
Units with 10 kW Heaters
Wetted Part
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
3A2797R
US
2000 psi
180°F
50 psi to 100 psi
#8 (1/2 in.) JIC (3/4-16 unf), with #5 (5/16 in.) JIC adapter
#10 (5/8 in.) JIC (7/8-14 unf), with #6 (3/8 in.) JIC adapter
1/4 npsm(m), with plastic tubing, 250 psi (1.75 MPa, 17.5 bar) maximum
See 400 V Power Requirements on page 5
See Models on page 4
(12 kW for 1:1 Models Only)
Citgo A/W Hydraulic Oil, ISO Grade 46
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide,
chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene,
chemically resistant o-rings
Metric
14 MPa, 138 bar
82°C
345 kPa, 3.4 bar to
1/2 npt(f)
3/4 npt(f)
195-264V, 50/60 Hz
360-440V, 50/60 Hz
93 dB
10 kW full load
9 gal. (34 liters)
868 lb (394 kg)
Technical Data
0.7 MPa, 7 bar
97