Graco PRO Delta Spray 240-385 Instructions-Parts List Manual

Light-duty cart mount, packages

Advertisement

Quick Links

INSTRUCTIONS–PARTS LIST
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
INSTRUCTIONS
ACETAL HUSKY
PRO / Delta Spray
Metal fluid fittings and hose couplings are stainless steel.
100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure
Packages with Fluid Pressure Regulators
Model No. 240–385
with hoses and Delta Spray air spray gun
Model No. 240–386
with hoses and Delta Spray HVLP gun
Model No. 240–387
with hoses and PRO 3500sc electrostatic gun
Model No. 240–388
with hoses and PRO 4500sc electrostatic gun
Packages with Surge Tanks
Model No. 240–397
with hoses and Delta Spray air spray gun
Model No. 240–398
with hoses and Delta Spray HVLP gun
This gun and hose for PRO 3500sc
Electrostatic package
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
307, LIGHT-DUTY CART MOUNT
Graco Inc. is registered to I.S. EN ISO 9001
First choice when
quality counts.
Packages
This gun and hose for Delta Spray Air Spray
package or Delta Spray HVLP package
308–821
Rev. A

Advertisement

Table of Contents
loading

Summary of Contents for Graco PRO Delta Spray 240-385

  • Page 1 This gun and hose for PRO 3500sc This gun and hose for Delta Spray Air Spray Electrostatic package package or Delta Spray HVLP package GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441 Graco Inc. is registered to I.S. EN ISO 9001...
  • Page 2: Table Of Contents

    ......CAUTION Graco Phone Number .....
  • Page 3 This equipment is for professional use only. Read all the instruction manuals, tags, and labels before operating the equipment. Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco distributor. Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
  • Page 4: Setup

    WARNING General Information To prevent hazardous concentrations of toxic Always use Genuine Graco Parts and Accessories, and/or flammable vapors, spray only in a properly available from your Graco distributor. See the ventilated spray booth. Never operate the spray Product Data Sheet for this package, Form No.
  • Page 5 Setup Hose Connections Positioning Cart Over Fluid Pail This package is shipped with the hoses connected. This package is shipped assembled. To position the Before you disconnect any hoses, make a note of the cart over the fluid pail, lift the entire assembly, and proper connections.
  • Page 6: Operation

    Operation Using the Gun 3. Slowly open the gun air regulator (F), and pull the gun trigger just enough to open only the air valve See the gun instruction manual for gun operation, in the gun. With the gun air triggered, set the gun care, flushing, cleaning, and technical data.
  • Page 7 Operation Priming the System See Fig. 2 1. Close the gun air regulator (F). 6. Slowly open the gun air regulator (F), and pull the gun trigger just enough to open only the air valve 2. If your system has a fluid pressure regulator (G), in the gun.
  • Page 8 Operation Using the Recirculation Feature 3. Place the suction tube into a grounded metal pail of compatible solvent. See Fig. 2 4. Make sure the air regulators (E and F) and The recirculation tube drains unused fluid back into the bleed-type master air valve (K) are closed.
  • Page 9: Maintenance

    Maintenance See the separate component instruction manuals for individual component maintenance procedures. Access to some system components requires that you remove the shields. The following steps are for shield removal. Shield replacement is the reverse of these steps, so make sure you take notes on the proper hose connections.
  • Page 10: Parts List And Parts Drawing 240-385 To 240-388

    Parts List Light-Duty Cart Packages with Fluid Pressure Regulators Model No. 240–385, Delta Spray air spray package Model No. 240–386, Delta Spray HVLP package Model No. 240–387, PRO 3500sc electrostatic package Model No. 240–388, PRO 4500sc electrostatic package Ref. Ref. Part No.
  • Page 11 Parts Drawing Light-Duty Cart Packages with Fluid Pressure Regulators Model No. 240–385, Delta Spray air spray package Model No. 240–386, Delta Spray HVLP package Model No. 240–387, PRO 3500sc electrostatic package Model No. 240–388, PRO 4500sc electrostatic package Grounding Detail Note: For PRO packages only , terminal end of ground wire (49) is assembled between nut and lockwasher on handle...
  • Page 12: 240-397 And 240-398

    Parts List Light-Duty Cart Packages with Surge Tanks Model No. 240–397, Delta Spray air spray package Model No. 240–398, Delta Spray HVLP package Ref. Ref. Part No. Description Qty. Part No. Description Qty. 240–210 SHIELD ASSY, front 106–285 BOLT, “U” 100–333 SCREW, cap, hex head Contains 1a to 1h, shown in Fig.
  • Page 13 Parts Drawing Light-Duty Cart Packages with Surge Tanks Model No. 240–397, Delta Spray air spray package Model No. 240–398, Delta Spray HVLP package Grounding Detail...
  • Page 14: Fluid Filter Kit 240-440

    To avoid sharp bends in the tube, you may have to cut Part No. Description Qty. it to a shorter length. 114–361 FILTER, fluid Apply Graco Thread Sealer, or Loctite 567, or equiv- alent to male threads. 113–322 CONNECTOR, male 054–188 TUBE; PTFE; 3/8” O.D.
  • Page 15: Suction Tube Kit 240-465

    Accessory Suction Tube Kit Suction Tube Kit 240–465 Ref. Apply Graco Thread Sealer, or Loctite 567, or equivalent to threads. Part No. Description Qty. 232–692 KIT ASSEMBLY, suction tube 193–411 NIPPLE 193–459 TUBE, recirculation 103–473 TIE, wire The Suction Kit, listed above, can be installed for drawing fluid from a container that is not directly under the unit.
  • Page 16: Technical Data

    Technical Data Category Data Maximum fluid working pressure 100 psi (0.7 MPa, 7 bar) Maximum incoming air pressure 100 psi (0.7 MPa, 7 bar) Maximum operating temperature 120 F (49 C) See separate gun instruction manual. Pump See separate pump instruction manual. Fluid pressure regulator See separate fluid pressure regulator instruction manual.
  • Page 17: Dimensions

    Dimensions 18.0 in. (457 mm) 39.1 in. (993 mm) 20.2 in. (513 mm) 16.8 in. (427 mm)

Table of Contents