Ptz Control By Remote Keyboard; Ptz Control By Remote Controller; Ptz Control By Client Software - Vista QTVI08L Installation And User Manual

4-2. PTZ Control by remote keyboard

1. Select Dome from the keyboard, ensure the keyboard is in Pan and Tilt mode.
2. Use the joystick to move the camera.
* For more detail, please refer to your keyboard manual.

4-3. PTZ Control by remote controller

[ Camera selection ]
The PTZ cameras can be controlled in either full screen
or split screen mode. If in split screen mode press the
camera selection button(①), the PTZ camera icon will
step from one camera to the next on the split screen.
[ Pan and Tilt control ]
Press the P/T button(②) to enter the Pan/Tilt mode.
To move the dome use the arrows buttons;
Left(⑤) : Pan left, Right(⑥) : Pan right
Up(⑦) : Tilt up, Down(⑧) : Tilt down
[ Zoom and Focus control ]
Press the Z/F button(③) to enter the Zoom/Focus mode.
To zoom or focus use the arrows buttons;
Left(⑤) : Focus near, Right(⑥) : Focus far
Up(⑦) : Zoom in, Down(⑧) : Zoom out

4-4. PTZ Control by Client software

While Client software is running select the dome required.
1. Enter the Pan/Tilt mode by pressing the PTZ icon
at the top of the screen.
The Pan/Tilt control window(①) will appear.
2. To move the dome use the arrows buttons;
Left : Pan left, Right : Pan right
Up : Tilt up, Down : Tilt down
3. Press the Z/F mode button(②) on the control window
to change to the Zoom/Focus mode.
The Zoom/Focus control window(③) will appear.
4. To zoom or focus use the arrows buttons;
Left : Focus near, Right : Focus far
Up : Zoom in, Down : Zoom out
QTVI Manual V2.0
QTVI installation and user manual
⑤
① ② ③ ④
①
⑤
③
24
⑦
⑥
⑧
②