Recording - Vista QTVI08L Installation And User Manual

2. Recording

All recorded data is watermarked to ensure that it is not tampered with. Using the software
supplied the legitimacy of this data can be verified.
2-1. Global
Watermark
Generally this should be set to on, this allows the supplied software to verify the downloaded
information to ensure it has not been tampered with or changed.
HDD Overwrite
Generally this should be set to on to ensure that the DVR does not stop recording when the
hard drives are full.
Codec Mode
- Standard : encoding mode for standard picture quality
- Advanced : encoding mode for optimum picture quality
Quality
The amount of compression applied to the recording can be changed between Best, Good
and Standard.
Non-Alarmed Rec Mode
It allows to record the video of the cameras that are not in alarm mode.
- YES : Both the alarmed channels and the non-alarmed channels are recorded.
- NO : Only alarmed channels are recorded.
Non-Alarmed Cam Res/FPS
This is the resolution & frame rate(the number of pictures per second) that the DVR will
record the cameras that are not in alarm, during the Alarm event (Alarms, Motion or Audio).
It can be set to one of the normal recording settings.
Pre-Alarm Duration
This is the time for which the DVR will buffer recordings, to use as pre-alarm events, It can
be set to 0, 5, 10, 15 or 20 seconds.
QTVI Manual V2.0
QTVI installation and user manual
31