Event - Vista QTVI08L Installation And User Manual

5. Event

This section is used to inform the user as to an event occurring, this can be by the sounding
of a buzzer or by sending an e-mail to a predefined address.
5-1. E-Mail Registration
Within this section up to 3 users can be set-up to receive an email on the occurrence of an
event such as Video Loss / Alarm / Motion or Power Loss. An e-mail will only be sent if the
DVR is sitting on a network with access to the Internet, e.g. through a router.
The e-mail addresses are set via the alphanumeric buttons on the remote controller, or from
the on screen keyboard via the mouse.
The Sender Address is the address that will appear on the e-mail received by the user, this
should be set logically to identify the specific DVR.
The report period is used to set how often e-mails are sent: Immediately on and event, Daily
or Weekly
Start/End Time : Enable to send e-mail notifications only for events that occur within a
Send Test Mail :
QTVI Manual V2.0
QTVI installation and user manual
specified range of time.
Enable to send a test e-mail to the addresses so allowing the installer
to verify if the setup is correct
.
48