Ptz Control By Remote Controller - Vista Quantum XTRA Installation And User Manual

[ Zoom Control ]
To zoom in and out rotate the wheel on the mouse
[ Focus Control ]
To manually focus use the focus near and far icons on the tool bar
[ Preset positions ]
1. To store a preset position, move the camera to the required position.
2. Press the Set Preset button(
3. Enter the preset number to be stored then press OK.
[ Call Preset ]
1. To recall a preset position press the Call Preset button( ), the popup window will appear.
2. Enter the preset number you want then press OK.

4-2. PTZ Control by remote controller

[ Camera selection ]
The PTZ cameras can be controlled in either full screen
or split screen mode. If in split screen mode press the
camera selection button( ), the PTZ camera icon will
step from one camera to the next on the split screen.
[ Pan and Tilt control ]
Press the P/T button( ) to enter the Pan/Tilt mode.
To move the dome use the arrows buttons;
Left( ) : Pan left, Right( ) : Pan right
Up( ) : Tilt up, Down( ) : Tilt down
[ Zoom and Focus control ]
Press the Z/F button( ) to enter the Zoom/Focus mode.
To zoom or focus use the arrows buttons;
Left( ) : Focus near, Right( ) : Focus far
Up( ) : Zoom in, Down( ) : Zoom out
Vista QXTRA User and installation manual V1.0
), the popup window will appear.
35