Vista QTVI08L Installation And User Manual page 39

QTVI installation and user manual
** NOTE : Playback following time change
The DVR uses the time and date to index video on the hard disk drive so you can find it later.
Changing the time can cause the DVR to work improperly, when you try to play back video. If
you set the hour ahead, this is not a problem. But, if you set the hour back, there will be more
than one recording with the same time stamp.
Such as during the October Daylight Saving Time changeover, if you try to search for video
between 1 am and 2 am, the recorder may not operate properly because there will be two
hours of recorded video during this time period. To view video during this overlapping time
period, you must start playback before 1 am, then recorder will play both hours between 1
am and 2 a.m.
You cannot do a backward search through the overlapping time. But, you can do forward
search. The Time and Date and the DST time can be changed from the Mouse or the
Remote Control.
Video Type
Video Type can be set in this menu without rebooting or initialisation. The default is PAL,
NTSC can also be selected.
IR Remote Address
The remote control can be used to control up to 16 DVRs, the ID number on
each can be set to a unique address so that the remote will only control one
at a time if they are in close proximity. The default is 11.
Repeated click on the ID value to change to the required number.
To select a unit on the remote control press the ID button, followed by the
number, followed by the ID button again. The LED will flash slowly.
GA resolution
V
The VGA resolution can be set from 1024x768 to 1920x1080.
HDMI resolution
The HDMI resolution can be set to 1080i, 1080p or Auto.
If it is set to Auto, the DVR will automatically detect the HDMI resolution of HDTV and change
the HDMI resolution of DVR to the same resolution of HDTV.
Initialization
All the menu settings will be returned to the factory default. To carry out this function the
system recording will have to be turned off.
Information
The information screen shows the hard disk size, current firmware revisions, IP address and
MAC address.
39
QTVI Manual V2.0